PowerPoint - Créer des animations personnalisées avec des trajectoires Tutoriels

Créez des présentations épatantes avec des animations personnalisées en utilisant les trajectoires et l'outil Reproduire l'animation. Vous apprendrez à contrôler le sens et la séquence des animations par les options des faits mais aussi à tracer votre propre trajectoire et à mettre des objets en couches.

  • 3:22
  • 1610 vues
00:00:08
Vous verrez que ce n'est vraiment pas difficile une fois vous avez compris comment ça marche mais commençons modestement.
00:00:15
Cliquez sur la forme appeler forme derrière un à présent si nous ajoutons une animation d'ouverture quelques entrée brusque nous pouvons contrôler l'endroit où la forme s' arrête et le sens et la séquence avec les options des faits mais nous ne pouvons pas contrôler l'endroit où la forme commence où la trajectoire qu empruntent pour cela nous devons utiliser les trajectoires.
00:00:35
Accéder à trajectoire est sélectionné ligne.
00:00:41
Ceci est la trajectoire la ligne décrit le chemin la flèche verte indique le début de la trajectoire de la forme.
00:00:47
La flèche rouge indique sa fin.
00:00:50
Sélectionné la trajectoire la forme semi-transparente affiche la formation point d'arriver.
00:00:55
Faites glisser la flèche rouge et positionner le point d'arriver sur la forme devant.
00:00:59
Ensuite afficher un aperçu de l'animation la 1ère forme passe derrière la 2nde.
00:01:06
Les trajectoires peuvent être très amusante essayez-en d'autres comme les courbes.
00:01:13
Mais les boucles.
00:01:19
Piquez également sur chemin personnalisé si vous voulez tracer votre propre trajectoire.
00:01:28
Revenons la diapositive précédente et ajoutons une trajectoire à forme derrière 2.
00:01:32
Utiliser l'outil reproduire l'animation pour copier l'animation.
00:01:40
Ensuite sélectionné la trajectoire et positionner son point d'arrivée sur la forme devant.
00:01:47
Afficher un aperçu de l'animation.
00:01:51
L'animation fonctionne bien mais la deuxième forme derrière fini par recouvrir la forme que nous voulons garder à l'avant-plan.
00:01:57
C'est un problème auquel vous serez plus souvent confrontés lorsque vous créez des animations personnalisées mais il est facile à résoudre.
00:02:03
Cliquez avec le bouton droit sur la forme puis cliquez sur mettre à l'arrière plan reculer.
00:02:09
À présent afficher un aperçu de l'animation.
00:02:13
C'est le résultat que nous attend Dion.
00:02:15
Comme vous pouvez le constater tous les objets de la diapositive sont organisées sous forme de couches en envoyant la forme à l'arrière nous l'avons déplacé vers une couche à l'arrière de la forme devant.
00:02:26
Voici une autre façon de créer des animations personnalisées cette forme de balle contient enfaite 2 animations.
00:02:33
Une trajectoire qui déplace la forme horizontalement et une animation rotation qui donne l'impression que la balle roule pendant qu'elle se déplace ?
00:02:41
Pour ajouter plusieurs animations un objet sélectionné la 1ère animation dans cette galerie ensuite cliquez sur ajouter une animation pour ajouter les autres.
00:02:50
N'oubliez pas non plus option supplémentaire des faits et de minutage voici une autre façon d'ouvrir cette boîte de dialogue dans le volet animation.
00:02:57
Cliquez sur la flèche en regard de l'animation et cliquez sur options des faits.
00:03:02
J'ai ajouté un version automatique aux animations de façon à ce que les objets reviennent à leur emplacement initial.
00:03:09
Vous disposez à présent de toutes les informations nécessaires pour commencer à créer des animations dans PowerPoint.
00:03:15
La meilleure façon de comprendre le fonctionnement des animations consiste à essayer par vous même.

Il n’existe aucun élément correspondant à votre recherche dans cette vidéo...
Effectuez une autre recherche ou retournez au contenu !

 

00:00:08
Вы увидите, что это действительно не сложно, как только вы поймете, как это работает, но давайте начнем скромно.
00:00:15
Нажмите на фигуру вызова фигуры позади одного, если мы добавим открывающую анимацию, некоторый внезапный ввод, мы можем контролировать, где форма останавливается, а также направление и последовательность с вариантами фактов, но мы не можем контролировать, где начинается фигура, где траектория, которую мы принимаем для этого, мы должны использовать траектории.
00:00:35
Перейти на траекторию выбрана строка.
00:00:41
Это траектория, по которую линия описывает путь, зеленая стрелка указывает начало траектории фигуры.
00:00:47
Красная стрелка указывает на его конец.
00:00:50
Выбранная траектория полупрозрачной формы отображает точку формирования прибытия.
00:00:55
Перетащите красную стрелку и поместите точку прибытия на фигуру спереди.
00:00:59
Затем покажите предварительный просмотр анимации, 1-я фигура проходит позади 2-й.
00:01:06
Траектории могут быть очень веселыми, попробуйте другие, как кривые.
00:01:13
Но петли.
00:01:19
Также найдите пользовательский путь, если вы хотите наметить свою собственную траекторию.
00:01:28
Давайте вернемся к предыдущему слайду и добавим фигурную траекторию позади 2.
00:01:32
Используйте инструмент Воспроизвести анимацию для копирования анимации.
00:01:40
Затем выберите траекторию и расположите ее точку прибытия на фигуре спереди.
00:01:47
Предварительный просмотр анимации.
00:01:51
Анимация работает хорошо, но вторая форма позади в конечном итоге покрывает форму, которую мы хотим сохранить на переднем плане.
00:01:57
Это проблема, с которой вы будете сталкиваться чаще при создании пользовательских анимаций, но ее легко решить.
00:02:03
Щелкните фигуру правой кнопкой мыши и выберите команду Переместить назад в фоновом режиме.
00:02:09
Теперь просмотрите анимацию.
00:02:13
Это результат, который Дион ожидает от нас.
00:02:15
Как вы можете видеть, все объекты на слайде организованы как слои, отправив фигуру на заднюю часть, мы переместили ее в слой в задней части фигуры спереди.
00:02:26
Вот еще один способ создания пользовательских анимаций, эта форма шара на самом деле содержит 2 анимации.
00:02:33
Траектория, которая перемещает фигуру по горизонтали, и вращающаяся анимация, которая заставляет мяч чувствовать, что мяч катится по мере его движения?
00:02:41
Чтобы добавить несколько анимаций выбранного объекта в 1-ю анимацию в этой галерее, затем нажмите на добавить анимацию, чтобы добавить другие.
00:02:50
Кроме того, не забывайте о дополнительных фактах и опции синхронизации, вот еще один способ открыть это диалоговое окно в области анимации.
00:02:57
Щелкните стрелку рядом с анимацией и выберите Пункт Параметры фактов.
00:03:02
Я добавил автоматическую версию к анимации, чтобы объекты возвращались в исходное местоположение.
00:03:09
Теперь у вас есть вся информация, необходимая для начала создания анимации в PowerPoint.
00:03:15
Лучший способ понять, как работает анимация, - это попробовать это на себе.

Il n’existe aucun élément correspondant à votre recherche dans cette vidéo...
Effectuez une autre recherche ou retournez au contenu !

 

00:00:08
You will see that it is really not difficult once you understand how it works but let's start modestly.
00:00:15
Click on the shape call shape behind one now if we add an opening animation some sudden input we can control where the shape stops and the direction and sequence with the options of the facts but we can not control where the shape begins where the trajectory that we take for this we must use the trajectories.
00:00:35
Go to trajectory is selected row.
00:00:41
This is the trajectory the line describes the path the green arrow indicates the beginning of the trajectory of the shape.
00:00:47
The red arrow indicates its end.
00:00:50
Selected the trajectory the semi-transparent shape displays the formation point of arrival.
00:00:55
Drag the red arrow and position the point of arrival on the shape in front.
00:00:59
Then show a preview of the animation the 1st shape passes behind the 2nd.
00:01:06
Trajectories can be a lot of fun try others like curves.
00:01:13
But the loops.
00:01:19
Also poke on custom path if you want to chart your own trajectory.
00:01:28
Let's go back to the previous slide and add a shape-shaped trajectory behind 2.
00:01:32
Use the Reproduce Animation tool to copy the animation.
00:01:40
Then select the trajectory and position its arrival point on the shape in front.
00:01:47
Preview the animation.
00:01:51
The animation works well but the second form behind ends up covering the shape we want to keep in the foreground.
00:01:57
This is a problem you'll face more often when creating custom animations but it's easy to solve.
00:02:03
Right-click the shape, and then click Move Backward in the Background.
00:02:09
Now preview the animation.
00:02:13
This is the result that Dion expects us.
00:02:15
As you can see all the objects on the slide are organized as layers by sending the shape to the back we moved it to a layer at the back of the shape in front.
00:02:26
Here is another way to create custom animations this ball form actually contains 2 animations.
00:02:33
A trajectory that moves the shape horizontally and a rotating animation that makes the ball feel like the ball is rolling as it moves?
00:02:41
To add several animations a selected object the 1st animation in this gallery then click on add an animation to add the others.
00:02:50
Also, don't forget additional facts and timing option here is another way to open this dialog box in the animation pane.
00:02:57
Click the arrow next to the animation and click Fact Options.
00:03:02
I added an automatic version to the animations so that the objects returned to their original location.
00:03:09
Now you have all the information you need to start creating animations in PowerPoint.
00:03:15
The best way to understand how animations work is to try it out for yourself.

Il n’existe aucun élément correspondant à votre recherche dans cette vidéo...
Effectuez une autre recherche ou retournez au contenu !

 

00:00:08
Verás que realmente no es difícil una vez que entiendas cómo funciona, pero comencemos modestamente.
00:00:15
Pulsamos sobre la forma de llamada forma detrás de una ahora si añadimos una animación de apertura alguna entrada repentina podemos controlar dónde se detiene la forma y la dirección y secuencia con las opciones de los hechos pero no podemos controlar dónde comienza la forma donde la trayectoria que tomamos para ello debemos utilizar las trayectorias.
00:00:35
Ir a la trayectoria es la fila seleccionada.
00:00:41
Esta es la trayectoria de la línea que describe el camino la flecha verde indica el comienzo de la trayectoria de la forma.
00:00:47
La flecha roja indica su final.
00:00:50
Seleccionada la trayectoria, la forma semitransparente muestra el punto de formación de llegada.
00:00:55
Arrastre la flecha roja y coloque el punto de llegada en la forma en frente.
00:00:59
Luego muestre una vista previa de la animación que la 1ª forma pasa detrás de la 2ª.
00:01:06
Las trayectorias pueden ser muy divertidas, pruebe otras como las curvas.
00:01:13
Pero los bucles.
00:01:19
También pinche en la ruta personalizada si desea trazar su propia trayectoria.
00:01:28
Volvamos a la diapositiva anterior y agreguemos una trayectoria en forma de forma detrás de 2.
00:01:32
Utilice la herramienta Reproducir animación para copiar la animación.
00:01:40
A continuación, seleccione la trayectoria y coloque su punto de llegada en la forma de delante.
00:01:47
Vista previa de la animación.
00:01:51
La animación funciona bien, pero la segunda forma detrás termina cubriendo la forma que queremos mantener en primer plano.
00:01:57
Este es un problema que enfrentará con más frecuencia al crear animaciones personalizadas, pero es fácil de resolver.
00:02:03
Haga clic con el botón secundario en la forma y, a continuación, haga clic en Retroceder en segundo plano.
00:02:09
Ahora obtenga una vista previa de la animación.
00:02:13
Este es el resultado que Dion nos espera.
00:02:15
Como puedes ver todos los objetos de la diapositiva se organizan como capas enviando la forma a la parte posterior la movimos a una capa en la parte posterior de la forma en la parte delantera.
00:02:26
Aquí hay otra forma de crear animaciones personalizadas, esta forma de bola en realidad contiene 2 animaciones.
00:02:33
¿Una trayectoria que mueva la forma horizontalmente y una animación giratoria que haga que la pelota se sienta como si la pelota estuviera rodando a medida que se mueve?
00:02:41
Para agregar varias animaciones, un objeto seleccionado, la 1ª animación en esta galería, luego haga clic en agregar una animación para agregar las demás.
00:02:50
Además, no olvide hechos adicionales y la opción de temporización aquí es otra forma de abrir este cuadro de diálogo en el panel de animación.
00:02:57
Haga clic en la flecha situada junto a la animación y haga clic en Opciones de hechos.
00:03:02
Agregué una versión automática a las animaciones para que los objetos volvieran a su ubicación original.
00:03:09
Ahora tienes toda la información que necesitas para empezar a crear animaciones en PowerPoint.
00:03:15
La mejor manera de entender cómo funcionan las animaciones es probarlo por ti mismo.

Il n’existe aucun élément correspondant à votre recherche dans cette vidéo...
Effectuez une autre recherche ou retournez au contenu !

 

00:00:08
Sie werden sehen, dass es wirklich nicht schwierig ist, sobald Sie verstehen, wie es funktioniert, aber lassen Sie uns bescheiden beginnen.
00:00:15
Klicken Sie jetzt auf die Formaufrufform hinter einer, wenn wir eine Eröffnungsanimation hinzufügen, können wir steuern, wo die Form aufhört und die Richtung und Reihenfolge mit den Optionen der Fakten, aber wir können nicht steuern, wo die Form beginnt, wo die Flugbahn, die wir dafür nehmen, wir müssen die Trajektorien verwenden.
00:00:35
Gehe zu Leitkurve ist zeile ausgewählt.
00:00:41
Dies ist die Flugbahn, die die Linie beschreibt den Pfad, der grüne Pfeil den Anfang der Flugbahn der Form anzeigt.
00:00:47
Der rote Pfeil zeigt sein Ende an.
00:00:50
Ausgewählte Flugbahn Zeigt die halbtransparente Form den Formationspunkt der Ankunft an.
00:00:55
Ziehen Sie den roten Pfeil und positionieren Sie den Ankunftspunkt auf der Form davor.
00:00:59
Zeigen Sie dann eine Vorschau der Animation, die die 1. Form hinter der 2. verläuft.
00:01:06
Trajektorien können viel Spaß machen, andere wie Kurven auszuprobieren.
00:01:13
Aber die Schleifen.
00:01:19
Stöbern Sie auch auf benutzerdefinierten Pfad, wenn Sie Ihre eigene Flugbahn zeichnen möchten.
00:01:28
Kehren wir zur vorherigen Folie zurück und fügen eine formförmige Leitkurve hinter 2 hinzu.
00:01:32
Verwenden Sie das Werkzeug Animation reproduzieren, um die Animation zu kopieren.
00:01:40
Wählen Sie dann die Leitkurve aus und positionieren Sie ihren Ankunftspunkt auf der Form davor.
00:01:47
Zeigen Sie eine Vorschau der Animation an.
00:01:51
Die Animation funktioniert gut, aber die zweite Form dahinter verdeckt die Form, die wir im Vordergrund halten möchten.
00:01:57
Dies ist ein Problem, mit dem Sie beim Erstellen benutzerdefinierter Animationen häufiger konfrontiert werden, aber es ist einfach zu lösen.
00:02:03
Klicken Sie mit der rechten Maustaste auf das Shape, und klicken Sie dann im Hintergrund auf Rückwärts verschieben.
00:02:09
Zeigen Sie nun eine Vorschau der Animation an.
00:02:13
Das ist das Ergebnis, das Dion von uns erwartet.
00:02:15
Wie Sie sehen können, sind alle Objekte auf der Folie als Ebenen organisiert, indem die Form nach hinten gesendet wird, haben wir sie auf eine Ebene an der Rückseite der Form davor verschoben.
00:02:26
Hier ist eine weitere Möglichkeit, benutzerdefinierte Animationen zu erstellen, diese Ballform enthält tatsächlich 2 Animationen.
00:02:33
Eine Flugbahn, die die Form horizontal bewegt, und eine rotierende Animation, die dem Ball das Gefühl gibt, dass der Ball rollt, während er sich bewegt?
00:02:41
Um mehrere Animationen einem ausgewählten Objekt hinzuzufügen, die 1. Animation in dieser Galerie, klicken Sie dann auf Animation hinzufügen, um die anderen hinzuzufügen.
00:02:50
Vergessen Sie auch nicht zusätzliche Fakten und die Timing-Option hier ist eine weitere Möglichkeit, dieses Dialogfeld im Animationsbereich zu öffnen.
00:02:57
Klicken Sie auf den Pfeil neben der Animation und dann auf Faktenoptionen.
00:03:02
Ich habe den Animationen eine automatische Version hinzugefügt, damit die Objekte an ihren ursprünglichen Speicherort zurückkehren.
00:03:09
Jetzt haben Sie alle Informationen, die Sie benötigen, um mit dem Erstellen von Animationen in PowerPoint zu beginnen.
00:03:15
Der beste Weg, um zu verstehen, wie Animationen funktionieren, ist, es selbst auszuprobieren.

Il n’existe aucun élément correspondant à votre recherche dans cette vidéo...
Effectuez une autre recherche ou retournez au contenu !

 

00:00:08
Você verá que não é realmente difícil uma vez que você entende como funciona, mas vamos começar modestamente.
00:00:15
Clique na forma de chamada de forma atrás de uma agora se adicionarmos uma animação de abertura alguma entrada repentina podemos controlar onde a forma pára e a direção e sequência com as opções dos fatos, mas não podemos controlar onde a forma começa onde a trajetória que tomamos para isso devemos usar as trajetórias.
00:00:35
A trajetória é selecionada.
00:00:41
Esta é a trajetória que a linha descreve o caminho que a seta verde indica o início da trajetória da forma.
00:00:47
A seta vermelha indica sua extremidade.
00:00:50
Selecionou a trajetória em que a forma semi-transparente exibe o ponto de chegada de formação.
00:00:55
Arraste a seta vermelha e posicione o ponto de chegada na forma na frente.
00:00:59
Em seguida, mostre uma prévia da animação que a primeira forma passa atrás da 2ª.
00:01:06
Trajetórias podem ser muito divertidas tentem outros como curvas.
00:01:13
Mas os loops.
00:01:19
Também cutuque o caminho personalizado se você quiser traçar sua própria trajetória.
00:01:28
Vamos voltar ao slide anterior e adicionar uma trajetória em forma de forma atrás de 2.
00:01:32
Use a ferramenta Reproduzir animação para copiar a animação.
00:01:40
Em seguida, selecione a trajetória e posicione seu ponto de chegada na forma na frente.
00:01:47
Visualize a animação.
00:01:51
A animação funciona bem, mas a segunda forma atrás acaba cobrindo a forma que queremos manter em primeiro plano.
00:01:57
Este é um problema que você enfrentará com mais frequência ao criar animações personalizadas, mas é fácil de resolver.
00:02:03
Clique com o botão direito do mouse na forma e clique em Mover para trás no plano de fundo.
00:02:09
Agora veja a animação.
00:02:13
Este é o resultado que Dion nos espera.
00:02:15
Como você pode ver todos os objetos no slide são organizados como camadas enviando a forma para trás, movemos-a para uma camada na parte de trás da forma na frente.
00:02:26
Aqui está outra maneira de criar animações personalizadas este formulário de bola realmente contém 2 animações.
00:02:33
Uma trajetória que move a forma horizontalmente e uma animação giratória que faz a bola sentir como se a bola está rolando enquanto se move?
00:02:41
Para adicionar várias animações, um objeto selecionado a primeira animação nesta galeria, clique em adicionar uma animação para adicionar as outras.
00:02:50
Além disso, não se esqueça de fatos adicionais e opção de tempo aqui é outra maneira de abrir esta caixa de diálogo no painel de animação.
00:02:57
Clique na seta ao lado da animação e clique em Opções de Fatos.
00:03:02
Adicionei uma versão automática às animações para que os objetos retornassem ao local original.
00:03:09
Agora você tem todas as informações que precisa para começar a criar animações no PowerPoint.
00:03:15
A melhor maneira de entender como as animações funcionam é experimentá-lo por si mesmo.

Il n’existe aucun élément correspondant à votre recherche dans cette vidéo...
Effectuez une autre recherche ou retournez au contenu !

 

00:00:08
Je zult zien dat het echt niet moeilijk is als je eenmaal begrijpt hoe het werkt, maar laten we bescheiden beginnen.
00:00:15
Klik nu op de vormaanroepvorm achter een als we een openingsanimatie toevoegen, kunnen we een plotselinge invoer bepalen waar de vorm stopt en de richting en volgorde met de opties van de feiten, maar we kunnen niet bepalen waar de vorm begint waar het traject dat we hiervoor nemen we moeten de trajecten gebruiken.
00:00:35
Ga naar traject is geselecteerde rij.
00:00:41
Dit is het traject dat de lijn beschrijft het pad de groene pijl geeft het begin van het traject van de vorm aan.
00:00:47
De rode pijl geeft het einde aan.
00:00:50
Geselecteerd op het traject geeft de semi-transparante vorm het formatiepunt van aankomst weer.
00:00:55
Sleep de rode pijl en plaats het aankomstpunt op de vorm ervoor.
00:00:59
Laat dan een preview van de animatie zien dat de 1e vorm achter de 2e passeert.
00:01:06
Trajecten kunnen heel leuk zijn om anderen zoals bochten te proberen.
00:01:13
Maar de lussen.
00:01:19
Prik ook op aangepast pad als je je eigen traject wilt uitstippelen.
00:01:28
Laten we teruggaan naar de vorige dia en een vormvormig traject achter 2 toevoegen.
00:01:32
Gebruik het gereedschap Animatie reproduceren om de animatie te kopiëren.
00:01:40
Selecteer vervolgens het traject en plaats het aankomstpunt op de vorm ervoor.
00:01:47
Bekijk een voorbeeld van de animatie.
00:01:51
De animatie werkt goed, maar de tweede vorm erachter bedekt uiteindelijk de vorm die we op de voorgrond willen houden.
00:01:57
Dit is een probleem dat u vaker zult tegenkomen bij het maken van aangepaste animaties, maar het is gemakkelijk op te lossen.
00:02:03
Klik met de rechtermuisknop op de shape en klik vervolgens op Achteruitgaan op de achtergrond.
00:02:09
Bekijk nu een voorbeeld van de animatie.
00:02:13
Dit is het resultaat dat Dion van ons verwacht.
00:02:15
Zoals u kunt zien, zijn alle objecten op de dia georganiseerd als lagen door de vorm naar achteren te sturen, we hebben deze verplaatst naar een laag aan de achterkant van de vorm aan de voorkant.
00:02:26
Hier is een andere manier om aangepaste animaties te maken, dit balformulier bevat eigenlijk 2 animaties.
00:02:33
Een traject dat de vorm horizontaal beweegt en een roterende animatie die de bal het gevoel geeft dat de bal rolt terwijl hij beweegt?
00:02:41
Om verschillende animaties toe te voegen aan een geselecteerd object, de 1e animatie in deze galerij, klikt u op een animatie toevoegen om de andere toe te voegen.
00:02:50
Vergeet ook niet extra feiten en timing optie hier is een andere manier om dit dialoogvenster in het animatievenster te openen.
00:02:57
Klik op de pijl naast de animatie en klik op Feitenopties.
00:03:02
Ik heb een automatische versie toegevoegd aan de animaties, zodat de objecten terugkeerden naar hun oorspronkelijke locatie.
00:03:09
Nu heb je alle informatie die je nodig hebt om animaties te maken in PowerPoint.
00:03:15
De beste manier om te begrijpen hoe animaties werken, is door het zelf uit te proberen.

Il n’existe aucun élément correspondant à votre recherche dans cette vidéo...
Effectuez une autre recherche ou retournez au contenu !

 

00:00:08
Vedrai che non è davvero difficile una volta capito come funziona, ma iniziamo modestamente.
00:00:15
Fai clic sulla forma di chiamata forma dietro uno ora se aggiungiamo un'animazione di apertura qualche input improvviso possiamo controllare dove si ferma la forma e la direzione e la sequenza con le opzioni dei fatti ma non possiamo controllare dove inizia la forma dove la traiettoria che prendiamo per questo dobbiamo usare le traiettorie.
00:00:35
Vai alla traiettoria è la riga selezionata.
00:00:41
Questa è la traiettoria la linea descrive il percorso la freccia verde indica l'inizio della traiettoria della forma.
00:00:47
La freccia rossa indica la sua fine.
00:00:50
Selezionata la traiettoria, la forma semitrasparente visualizza il punto di formazione di arrivo.
00:00:55
Trascina la freccia rossa e posiziona il punto di arrivo sulla forma di fronte.
00:00:59
Quindi mostra un'anteprima dell'animazione, la 1a forma passa dietro la 2a.
00:01:06
Le traiettorie possono essere molto divertenti provarne altre come le curve.
00:01:13
Ma i loop.
00:01:19
Colpisci anche il percorso personalizzato se vuoi tracciare la tua traiettoria.
00:01:28
Torniamo alla diapositiva precedente e aggiungiamo una traiettoria a forma di forma dietro 2.
00:01:32
Utilizzate lo strumento Riproduci animazione per copiare l'animazione.
00:01:40
Quindi selezionate la traiettoria e posizionate il suo punto di arrivo sulla forma anteriore.
00:01:47
Visualizza l'anteprima dell'animazione.
00:01:51
L'animazione funziona bene ma la seconda forma dietro finisce per coprire la forma che vogliamo mantenere in primo piano.
00:01:57
Questo è un problema che dovrai affrontare più spesso quando crei animazioni personalizzate, ma è facile da risolvere.
00:02:03
Fare clic con il pulsante destro del mouse sulla forma e quindi scegliere Sposta all'indietro in background.
00:02:09
Ora visualizza l'anteprima dell'animazione.
00:02:13
Questo è il risultato che Dion ci aspetta.
00:02:15
Come puoi vedere tutti gli oggetti sulla diapositiva sono organizzati come livelli inviando la forma sul retro l'abbiamo spostata su un livello sul retro della forma di fronte.
00:02:26
Ecco un altro modo per creare animazioni personalizzate questa forma di palla contiene in realtà 2 animazioni.
00:02:33
Una traiettoria che sposta la forma orizzontalmente e un'animazione rotante che fa sentire la palla come se la palla rotolasse mentre si muove?
00:02:41
Per aggiungere diverse animazioni un oggetto selezionato la 1a animazione in questa galleria quindi fare clic su aggiungi un'animazione per aggiungere le altre.
00:02:50
Inoltre, non dimenticare ulteriori fatti e l'opzione di temporizzazione qui è un altro modo per aprire questa finestra di dialogo nel riquadro dell'animazione.
00:02:57
Fare clic sulla freccia accanto all'animazione e fare clic su Opzioni fatto.
00:03:02
Ho aggiunto una versione automatica alle animazioni in modo che gli oggetti tornasse nella loro posizione originale.
00:03:09
Ora hai tutte le informazioni necessarie per iniziare a creare animazioni in PowerPoint.
00:03:15
Il modo migliore per capire come funzionano le animazioni è provarlo tu stesso.

Il n’existe aucun élément correspondant à votre recherche dans cette vidéo...
Effectuez une autre recherche ou retournez au contenu !

 

00:00:08
سترى أنه ليس من الصعب حقا بمجرد فهم كيف يعمل ولكن دعونا نبدأ متواضعة.
00:00:15
انقر على شكل نداء شكل واحد الآن إذا أضفنا فتح الرسوم المتحركة بعض المدخلات المفاجئة يمكننا التحكم حيث يتوقف الشكل والاتجاه وتسلسل مع خيارات الحقائق ولكن لا يمكننا التحكم حيث يبدأ الشكل حيث المسار الذي نتخذه لهذا يجب علينا استخدام المسارات.
00:00:35
الانتقال إلى مسار يتم تحديد الصف.
00:00:41
هذا هو المسار الذي يصف الخط المسار الذي يشير السهم الأخضر إلى بداية مسار الشكل.
00:00:47
يشير السهم الأحمر إلى نهايته.
00:00:50
حدد المسار الذي يعرض الشكل شبه الشفاف نقطة تشكيل الوصول.
00:00:55
اسحب السهم الأحمر وضع نقطة الوصول على الشكل في الأمام.
00:00:59
ثم عرض معاينة للرسوم المتحركة الشكل 1 يمر وراء 2.
00:01:06
مسارات يمكن أن يكون الكثير من المرح محاولة الآخرين مثل المنحنيات.
00:01:13
لكن الحلقات.
00:01:19
كزة أيضا على مسار مخصص إذا كنت ترغب في رسم المسار الخاص بك.
00:01:28
دعونا نعود إلى الشريحة السابقة وإضافة مسار على شكل شكل وراء 2.
00:01:32
استخدم أداة إعادة إنشاء الحركة لنسخ الحركة.
00:01:40
ثم حدد المسار ووضع نقطة وصولها على الشكل في الجبهة.
00:01:47
معاينة الحركة.
00:01:51
الرسوم المتحركة يعمل بشكل جيد ولكن النموذج الثاني وراء ينتهي تغطية الشكل الذي نريد أن تبقي في المقدمة.
00:01:57
هذه مشكلة ستواجهها في كثير من الأحيان عند إنشاء رسوم متحركة مخصصة ولكن من السهل حلها.
00:02:03
انقر بزر الماوس الأيمن فوق الشكل، ثم انقر فوق تحريك للخلف في الخلفية.
00:02:09
الآن معاينة الرسوم المتحركة.
00:02:13
هذه هي النتيجة التي يتوقعها ديون منا.
00:02:15
كما ترون يتم تنظيم جميع الكائنات على الشريحة كطبقات عن طريق إرسال الشكل إلى الخلف نقلناه إلى طبقة في الجزء الخلفي من الشكل في الجبهة.
00:02:26
هنا طريقة أخرى لإنشاء الرسوم المتحركة المخصصة هذا النموذج الكرة يحتوي فعلا 2 الرسوم المتحركة.
00:02:33
مسار يحرك الشكل أفقيا وحركات دوارة تجعل الكرة تشعر بأن الكرة تتدحرج أثناء تحركها؟
00:02:41
لإضافة العديد من الرسوم المتحركة كائن محدد الحركة 1 في هذا المعرض ثم انقر على إضافة الرسوم المتحركة لإضافة الآخرين.
00:02:50
أيضا، لا ننسى حقائق إضافية وتوقيت الخيار هنا هو وسيلة أخرى لفتح مربع الحوار هذا في جزء الرسوم المتحركة.
00:02:57
انقر فوق السهم الموجود بجوار الحركة وانقر فوق Fact Options ( خيارات الحقائق).
00:03:02
أضفت إصدار تلقائي للرسوم المتحركة بحيث الكائنات عاد إلى موقعها الأصلي.
00:03:09
الآن لديك كل المعلومات التي تحتاجها لبدء إنشاء الرسوم المتحركة في PowerPoint.
00:03:15
أفضل طريقة لفهم كيفية عمل الرسوم المتحركة هي تجربتها بنفسك.

Il n’existe aucun élément correspondant à votre recherche dans cette vidéo...
Effectuez une autre recherche ou retournez au contenu !

 

00:00:08
Nasıl çalıştığını anladığınızda gerçekten zor olmadığını göreceksiniz, ancak mütevazı bir şekilde başlayalım.
00:00:15
Şimdi birinin arkasındaki şekil çağırma şekline tıklayın Bir açılış animasyonu eklersek, şeklin nerede durduğunu ve gerçeklerin seçenekleriyle yönü ve dizilimini kontrol edebiliriz, ancak şeklin nerede başladığını kontrol edemiyoruz, bunun için aldığımız yörüngeyi kullanmalıyız.
00:00:35
Yörüngeye git seçili satırdır.
00:00:41
Bu, çizginin yeşil okun şeklin yörüngesinin başlangıcını gösterdiği yolu tarif ettiği yörüngedir.
00:00:47
Kırmızı ok sonunu gösterir.
00:00:50
Yörünge seçildiğinde, yarı saydam şekil varışın oluşum noktasını görüntüler.
00:00:55
Kırmızı oku sürükleyin ve varış noktasını öndeki şekle yerleştirin.
00:00:59
Ardından, 1.
00:01:06
Yörüngeler eğriler gibi diğerlerini denemek çok eğlenceli olabilir.
00:01:13
Ama döngüler.
00:01:19
Ayrıca kendi yörüngenizi çizmek istiyorsanız özel yolu dürtün.
00:01:28
Önceki slayta geri dönelim ve 2'nin arkasına şekil şeklinde bir yörünge ekleyelim.
00:01:32
Animasyonu kopyalamak için Animasyonu Yeniden Oluştur aracını kullanın.
00:01:40
Ardından yörüngeyi seçin ve varış noktasını öndeki şekle yerleştirin.
00:01:47
Animasyonu önizleyin.
00:01:51
Animasyon iyi çalışıyor, ancak arkasındaki ikinci form ön planda tutmak istediğimiz şekli kapsıyor.
00:01:57
Bu, özel animasyonlar oluştururken daha sık karşılaşacağınız bir sorundur, ancak çözülmesi kolaydır.
00:02:03
Şekli sağ tıklatın ve sonra Arka Planda Geriye Taşı'yı tıklatın.
00:02:09
Şimdi animasyonu önizleyin.
00:02:13
Bu Dion'un bizi beklediği sonuç.
00:02:15
Slayttaki tüm nesneleri gördüğünüz gibi, şekli arkaya göndererek katmanlar olarak düzenlenmiştir, öndeki şeklin arkasında bir katmana taşıdık.
00:02:26
İşte bu top formu aslında 2 animasyon içeren özel animasyonlar oluşturmanın başka bir yoludur.
00:02:33
Şekli yatay olarak hareket ettiren bir yörünge ve topu hareket ederken topun yuvarlandığını hissettiren dönen bir animasyon mu?
00:02:41
Birkaç animasyon eklemek için seçili nesneyi bu galerideki 1.
00:02:50
Ayrıca, animasyon bölmesinde bu iletişim kutusunu açmanın başka bir yolu da burada ek gerçekleri ve zamanlama seçeneğini unutmayın.
00:02:57
Animasyonun yanındaki oku tıklatın ve Bilgi Seçenekleri'ni tıklatın.
00:03:02
Animasyonlara otomatik bir sürüm ekledim, böylece nesneler özgün konumlarına döndü.
00:03:09
Artık PowerPoint'te animasyon oluşturmaya başlamak için ihtiyacınız olan tüm bilgilere sahipsiniz.
00:03:15
Animasyonların nasıl çalıştığını anlamanın en iyi yolu kendiniz denemektir.

Il n’existe aucun élément correspondant à votre recherche dans cette vidéo...
Effectuez une autre recherche ou retournez au contenu !

 

00:00:08
Zobaczysz, że to naprawdę nie jest trudne, gdy zrozumiesz, jak to działa, ale zacznijmy od małego.
00:00:15
Kliknij kształt, wywołaj kształt za jednym, jeśli dodamy animację otwierającą, jakieś nagłe dane wejściowe, możemy kontrolować, gdzie zatrzymuje się kształt, kierunek i sekwencję za pomocą opcji faktów, ale nie możemy kontrolować, gdzie zaczyna się kształt lub trajektoria, którą musimy użyć trajektorii do tego.
00:00:35
Przejdź do trajektorii jest wybrana linia.
00:00:41
Jest to trajektoria, linia opisuje ścieżkę, zielona strzałka wskazuje początek trajektorii kształtu.
00:00:47
Czerwona strzałka wskazuje jego koniec.
00:00:50
Wybrany trajektoria, półprzezroczysty kształt wyświetla punkt formowania przybycia.
00:00:55
Przeciągnij czerwoną strzałkę i umieść punkt przybycia na kształcie z przodu.
00:00:59
Następnie pokaż podgląd animacji, 1. formularz przechodzi za 2.
00:01:06
Trajektorie mogą być świetną zabawą, wypróbuj inne, takie jak krzywe.
00:01:13
Ale pętle.
00:01:19
Wybierz również spersonalizowaną ścieżkę, jeśli chcesz wytyczyć własną trajektorię.
00:01:28
Wróćmy do poprzedniego slajdu i dodajmy ścieżkę kształtu za 2.
00:01:32
Użyj narzędzia Malarz animacji, aby skopiować animację.
00:01:40
Następnie zaznacz trajektorię i umieść jej punkt końcowy na kształcie z przodu.
00:01:47
Wyświetl podgląd animacji.
00:01:51
Animacja działa dobrze, ale druga forma za nią zakrywa kształt, który chcemy zachować na pierwszym planie.
00:01:57
Jest to problem, z którym będziesz spotykać się częściej podczas tworzenia niestandardowych animacji, ale łatwo go rozwiązać.
00:02:03
Kliknij kształt prawym przyciskiem myszy i kliknij polecenie Przenieś z powrotem do tła.
00:02:09
Teraz podgląd animacji.
00:02:13
To jest wynik, który czeka na nas Dion.
00:02:15
Jak widać, wszystkie obiekty na slajdzie są zorganizowane jako warstwy, wysyłając kształt do tyłu, przenieśliśmy go na warstwę z tyłu kształtu z przodu.
00:02:26
Oto inny sposób tworzenia niestandardowych animacji: ten kształt kuli zawiera 2 animacje.
00:02:33
Trajektoria, która przesuwa kształt w poziomie i animacja obrotu, która sprawia wrażenie, że piłka toczy się podczas ruchu?
00:02:41
Aby dodać kilka animacji, obiekt zaznaczył 1. animację w tej galerii, a następnie kliknij Dodaj animację, aby dodać pozostałe.
00:02:50
Nie zapomnij również o dodatkowych faktach i opcji chronometrażu Oto inny sposób otwarcia tego okna dialogowego w okienku animacji.
00:02:57
Kliknij strzałkę obok animacji i kliknij polecenie Opcje faktów.
00:03:02
Dodałem automatyczną wersję do animacji, aby obiekty powracały do swojej pierwotnej lokalizacji.
00:03:09
Masz teraz wszystkie informacje potrzebne do rozpoczęcia tworzenia animacji w programie PowerPoint.
00:03:15
Najlepszym sposobem na zrozumienie, jak działają animacje, jest wypróbowanie ich samodzielnie.

Il n’existe aucun élément correspondant à votre recherche dans cette vidéo...
Effectuez une autre recherche ou retournez au contenu !

 

00:00:08
आप देखेंगे कि यह वास्तव में मुश्किल नहीं है जब आप समझते हैं कि यह कैसे काम करता है लेकिन चलो छोटे से शुरू करते हैं।
00:00:15
अब एक के पीछे आकृति कॉल आकार पर क्लिक करें यदि हम एक प्रारंभिक एनीमेशन जोड़ते हैं तो कुछ अचानक इनपुट हम नियंत्रित कर सकते हैं कि आकृति कहां रुकती है और तथ्यों के विकल्पों के साथ दिशा और अनुक्रम लेकिन हम यह नियंत्रित नहीं कर सकते कि आकार कहां से शुरू होता है या प्रक्षेपवक्र जिसे हमें इसके लिए प्रक्षेपपथ का उपयोग करना है।
00:00:35
प्रक्षेपवक्र पर जाएं चयनित लाइन है।
00:00:41
यह प्रक्षेपवक्र है जो रेखा उस पथ का वर्णन करती है जो हरा तीर आकार प्रक्षेपवक्र की शुरुआत को इंगित करता है।
00:00:47
लाल तीर अपने अंत को इंगित करता है।
00:00:50
प्रक्षेपवक्र का चयन किया गया अर्धपारदर्शी आकार आगमन के गठन बिंदु को प्रदर्शित करता है।
00:00:55
लाल तीर को खींचें और आगमन बिंदु को सामने आकार पर रखें।
00:00:59
फिर एनीमेशन का एक पूर्वावलोकन दिखाएं, पहला फॉर्म दूसरे के पीछे से गुजरता है।
00:01:06
प्रक्षेपपथ बहुत मजेदार हो सकता है दूसरों को कर्व्स की तरह आज़माना।
00:01:13
लेकिन लूप।
00:01:19
यदि आप अपना स्वयं का प्रक्षेपवक्र चार्ट करना चाहते हैं तो एक व्यक्तिगत पथ भी लें।
00:01:28
आइए पिछली स्लाइड पर वापस जाएं और 2 के पीछे एक आकार पथ जोड़ें।
00:01:32
ऐनिमेशन की प्रतिलिपि बनाने के लिए ऐनिमेशन पेंटर उपकरण का उपयोग करें।
00:01:40
फिर प्रक्षेपवक्र का चयन करें और सामने के आकार पर इसके अंतिम बिंदु को रखें।
00:01:47
ऐनिमेशन का पूर्वावलोकन करें.
00:01:51
एनीमेशन अच्छी तरह से काम करता है लेकिन पीछे दूसरा रूप उस आकार को कवर करता है जिसे हम अग्रभूमि में रखना चाहते हैं।
00:01:57
यह एक ऐसी समस्या है जिसका आपको कस्टम एनिमेशन बनाते समय अधिक बार सामना करना पड़ेगा लेकिन इसे हल करना आसान है।
00:02:03
आकृति राइट-क्लिक करें और पृष्ठभूमि पर वापस जाएँ क्लिक करें.
00:02:09
अब एनीमेशन का पूर्वावलोकन करें।
00:02:13
यह वह परिणाम है जो डायोन हमें इंतजार कर रहा है।
00:02:15
जैसा कि आप देख सकते हैं कि स्लाइड पर सभी वस्तुओं को पीछे की ओर आकार भेजकर परतों के रूप में व्यवस्थित किया जाता है, हमने इसे सामने आकार के पीछे एक परत में स्थानांतरित कर दिया।
00:02:26
कस्टम एनिमेशन बनाने का एक और तरीका यहां दिया गया है कि इस बॉल आकार में वास्तव में 2 एनिमेशन हैं।
00:02:33
एक प्रक्षेपवक्र जो आकार को क्षैतिज रूप से स्थानांतरित करता है और एक रोटेशन एनीमेशन जो यह आभास देता है कि गेंद चलते समय लुढ़कती है?
00:02:41
कई ऐनिमेशन जोड़ने के लिए किसी ऑब्जेक्ट ने इस गैलरी में पहला ऐनिमेशन चुना, फिर दूसरों को जोड़ने के लिए ऐनिमेशन जोड़ें क्लिक करें.
00:02:50
इसके अलावा, अतिरिक्त तथ्यों के बारे में मत भूलना और समय विकल्प यहां एनीमेशन फलक में इस संवाद बॉक्स को खोलने का एक और तरीका है।
00:02:57
ऐनिमेशन के बगल में स्थित तीर क्लिक करें और तथ्य विकल्प क्लिक करें.
00:03:02
मैंने एनिमेशन में एक स्वचालित संस्करण जोड़ा है ताकि ऑब्जेक्ट अपने मूल स्थान पर लौट आएं।
00:03:09
अब आपके पास PowerPoint में ऐनिमेशन बनाना शुरू करने के लिए आवश्यक सभी जानकारी है.
00:03:15
एनिमेशन कैसे काम करते हैं, यह समझने का सबसे अच्छा तरीका यह है कि इसे अपने लिए आज़माएं।

Il n’existe aucun élément correspondant à votre recherche dans cette vidéo...
Effectuez une autre recherche ou retournez au contenu !

 

00:00:08
Anda akan melihat bahwa itu benar-benar tidak sulit setelah Anda memahami cara kerjanya, tetapi mari kita mulai dari yang kecil.
00:00:15
Klik pada bentuk panggilan bentuk di belakang satu sekarang jika kita menambahkan animasi pembuka beberapa input tiba-tiba kita dapat mengontrol di mana bentuk berhenti dan arah dan urutan dengan opsi fakta tetapi kita tidak dapat mengontrol di mana bentuk dimulai atau lintasan yang kita harus menggunakan lintasan untuk ini.
00:00:35
Pergi ke lintasan adalah garis yang dipilih.
00:00:41
Ini adalah lintasan garis menggambarkan jalur panah hijau menunjukkan awal lintasan bentuk.
00:00:47
Panah merah menunjukkan ujungnya.
00:00:50
Dipilih lintasan bentuk semitransparan menampilkan titik pembentukan kedatangan.
00:00:55
Seret panah merah dan posisikan titik kedatangan pada bentuk di depan.
00:00:59
Kemudian perlihatkan pratinjau animasi yang dilewati formulir ke-1 di belakang yang ke-2.
00:01:06
Lintasan bisa sangat menyenangkan mencoba yang lain seperti kurva.
00:01:13
Tapi loopnya.
00:01:19
Juga ambil jalur yang dipersonalisasi jika Anda ingin memetakan lintasan Anda sendiri.
00:01:28
Mari kita kembali ke slide sebelumnya dan menambahkan jalur bentuk di belakang 2.
00:01:32
Gunakan alat Pewarna Animasi untuk menyalin animasi.
00:01:40
Kemudian pilih lintasan dan posisikan titik ujungnya pada bentuk di depan.
00:01:47
Pratinjau animasi.
00:01:51
Animasi bekerja dengan baik tetapi bentuk kedua di belakang akhirnya menutupi bentuk yang ingin kita pertahankan di latar depan.
00:01:57
Ini adalah masalah yang akan Anda hadapi lebih sering saat membuat animasi khusus tetapi mudah dipecahkan.
00:02:03
Klik kanan bentuk dan klik Pindahkan Kembali ke Latar Belakang.
00:02:09
Sekarang pratinjau animasi.
00:02:13
Inilah hasil yang Dion menanti kita.
00:02:15
Seperti yang Anda lihat semua objek pada slide diatur sebagai layer dengan mengirimkan bentuk ke belakang kita memindahkannya ke layer di belakang bentuk di depan.
00:02:26
Berikut adalah cara lain untuk membuat animasi khusus bentuk bola ini sebenarnya berisi 2 animasi.
00:02:33
Lintasan yang menggerakkan bentuk secara horizontal dan animasi rotasi yang memberi kesan bahwa bola menggelinding saat bergerak?
00:02:41
Untuk menambahkan beberapa animasi objek dipilih animasi ke-1 di galeri ini lalu klik tambahkan animasi untuk menambahkan yang lain.
00:02:50
Juga, jangan lupa tentang fakta tambahan dan opsi pengaturan waktu di sini adalah cara lain untuk membuka kotak dialog ini di panel animasi.
00:02:57
Klik panah di samping animasi dan klik Opsi Fakta.
00:03:02
Saya telah menambahkan versi otomatis ke animasi sehingga objek kembali ke lokasi aslinya.
00:03:09
Anda sekarang memiliki semua informasi yang Anda butuhkan untuk mulai membuat animasi di PowerPoint.
00:03:15
Cara terbaik untuk memahami cara kerja animasi adalah dengan mencobanya sendiri.

Il n’existe aucun élément correspondant à votre recherche dans cette vidéo...
Effectuez une autre recherche ou retournez au contenu !

 

00:00:08
Você verá que realmente não é difícil depois de entender como funciona, mas vamos começar pequeno.
00:00:15
Clique na forma chamada forma atrás de uma agora se adicionarmos uma animação de abertura alguma entrada abrupta podemos controlar onde a forma para e a direção e a sequência com as opções de fato, mas não podemos controlar onde a forma começa onde a trajetória que tomamos para isso temos que usar as trajetórias.
00:00:35
Ir para Caminho é a linha selecionada.
00:00:41
Esta é a trajetória, a linha descreve o caminho, a seta verde indica o início da trajetória da forma.
00:00:47
A seta vermelha indica o seu fim.
00:00:50
Selecionada a trajetória, a forma semitransparente exibe o ponto de formação de chegada.
00:00:55
Arraste a seta vermelha e posicione o ponto de pouso na forma à frente.
00:00:59
Em seguida, visualize a animação, a 1ª forma vai atrás da 2ª.
00:01:06
As trajetórias podem ser muito divertidas, experimente outras como curvas.
00:01:13
Mas os loops.
00:01:19
Também costurar no caminho personalizado se você quiser traçar sua própria trajetória.
00:01:28
Vamos voltar ao slide anterior e adicionar um caminho de forma atrás de 2.
00:01:32
Use a ferramenta Reproduzir animação para copiar a animação.
00:01:40
Em seguida, selecione a trajetória e posicione seu ponto final na forma à frente.
00:01:47
Visualize a animação.
00:01:51
A animação funciona bem, mas a segunda forma atrás acaba se sobrepondo à forma que queremos manter em primeiro plano.
00:01:57
Esse é um problema que você enfrentará com mais frequência ao criar animações personalizadas, mas é fácil de corrigir.
00:02:03
Clique com o botão direito do rato na forma e, em seguida, clique em Recolocar em Fundo.
00:02:09
Agora visualize a animação.
00:02:13
Esse é o resultado que Dion espera que façamos.
00:02:15
Como você pode ver, todos os objetos no slide são organizados como camadas, enviando a forma para trás, nós a movemos para uma camada na parte de trás da forma na frente.
00:02:26
Aqui está outra maneira de criar animações personalizadas, esta forma de bola na verdade contém 2 animações.
00:02:33
Uma trajetória que move a forma horizontalmente e uma animação de rotação que faz a bola parecer que está rolando enquanto se move?
00:02:41
Para adicionar várias animações, selecione um objeto, a 1ª animação nesta galeria e, em seguida, clique em adicionar animação para adicionar as outras.
00:02:50
Além disso, não se esqueça da opção adicional de fatos e tempo, aqui está outra maneira de abrir essa caixa de diálogo no painel de animação.
00:02:57
Clique na seta ao lado da animação e clique em Opções de fato.
00:03:02
Adicionei uma versão automática às animações para que os objetos retornem ao local original.
00:03:09
Agora você tem todas as informações necessárias para começar a criar animações no PowerPoint.
00:03:15
A melhor maneira de entender como as animações funcionam é experimentá-las por si mesmo.

Il n’existe aucun élément correspondant à votre recherche dans cette vidéo...
Effectuez une autre recherche ou retournez au contenu !

 

DiLeap AI: CE QUI POURRAIT VOUS INTÉRESSER

Rappel

Afficher